Southampton Hampshire UK|
This good looking Breton Cutter from 1913 would have been described as a 'copper bottomed investment' in her time, as she is sheathed in copper over pitched pine to the rubbing strake with Mahogany topsides and a 15mm teak deck on a 12mm epoxied marine ply sub-deck. The copper was finished in 2009 and she was relaunched in 2011.
She has a forward double berth, a Heads with Shower, 2 large berths in the saloon and 2 further pilot berths. She also has a full length bath under one of the forward berths.
She has had her coachroof raised so that there is good headroom in the saloon and galley.
She has a 50HP Beta engine and a modern electronics package, wind generator and battery charger.. She is ready for a new owner to take her to sea...
|Builder:||Ponte Labbe Naval-Le Havre-Cotre|
|No. of engines:||1|
|Engine model:||beta marine|
|Length over all:||15m|
|Length of deck:||13m|
|Draft, drive up:||1.8m|
|Keel type:||Full Keel|
|Fuel capacity:||75 Litres|
Forward cabin double berth with heads and shower
Saloon with 2 large berths to port and starboard
2 Pilot berths
Nicolle Associates offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
This vessel is VAT Not Applicable.
As always photographs do not do justice so a viewing is highly recommended.
This boat is lying in Southampton.
2015 Nicolle Associates
Note: Indicated location is approximate general area only.